The
EPS foam fusion machine can melt EPS/XPS/EPE/EPO etc foam materials.It works without heater at chamber end.It is different with traditional melt machine.
With silo on hopper storaging crushed materials,machine can reach its max capacity.The silo is steel rack and nylon bag materials.A crusher and blower and piping would prefer to work with the fusion machine as a system.
Benefits of 'Friction Produces Heat'
1) Almost needs no pre heating time,you can feed materials immediately after you turn on machine.Traditional lumps machine with heaters need about 20 minutes to heat chamber.
2) Almost no smoke to be produced.
3) Almost no smell to be produced.
4) Options to be with heater if the foam materials are wet.Cause heater can increase temperature to be higher inside chamber.
Silo on hopper is advised,it can be good for feeding with big capacity.
Temperature control and frequency control is installed at control box.
Hard teech reducer and copper motor are on the hot melt machine.So,it is good quality machine.
| Machine Hopper |
Motor Power |
Reducer No. |
Capacity |
Chamber Dia. |
| 900*900mm |
30kw |
173 |
300kg/h |
273mm |
We can custom make your machine model,we have different models,so,welcome to ask for more info.Thank you very much.
){kind=link}