The
EPS hot melter can crush and hot melt EPS/XPS/EPE/EPO etc foam materials.It works without heater at chamber end.It is different with traditional melt machine.
The machine is not produce heat by electric heater,it produce heat by friction inside machine chamber.It is different principle for heat. As we know,the machine melts foam by heat, it is how to produce heat. It is innovative technology,it needs no pre heating time to heat the chamber.
Benefits of 'Friction Produces Heat'
1) Almost needs no pre heating time,you can feed materials immediately after you turn on machine.Traditional lumps machine with heaters need about 20 minutes to heat chamber.
2) Almost no smoke to be produced.
3) Almost no smell to be produced.
4) Options to be with heater if the foam materials are wet.Cause heater can increase temperature to be higher inside chamber.
Foam Heat Melt Equipment works with two crushing shafts in hopper.
Conveyor for feeding materials is optional.
Temperature control and frequency control is installed at control box.
Hard teech reducer and copper motor are on the hot melt machine.
| Hopper Size |
Capacity |
Chamber Dia. |
Shredding Shafts Qty |
Motor Power |
Machine Size |
| 800*800mm |
200kg/h |
245mm |
2 pcs |
18.5kg |
1600*1500*800 |
){kind=link}