You can see these hot melt machines in the showcase are different design and all they have no electric heater at chamber.
Why there is no heater ring ??
The
EPS hot melt machine can crush and hot melt EPS/XPS/EPE/EPO etc foam materials.It works without heater at chamber end.It is different with traditional melt machine.There are two chambers to hot melt loose foam waste.
Benefits of 'Friction Produces Heat'
1) Almost needs no pre heating time,you can feed materials immediately after you turn on machine.Traditional lumps machine with heaters need about 20 minutes to heat chamber.
2) Almost no smoke to be produced.
3) Almost no smell to be produced.
4) Options to be with heater if the foam materials are wet.Cause heater can increase temperature to be higher inside chamber.
Benefits of two barrels
Bigger capacity you get from melt,users can just feed as many as he wants and get high capacity.
Benefits of two crushing shafts
The two shafts can rotate face to face to crush loose foam waste and its crushed scraps can be easily melts.Bigger capacity you can get from it.
Machine works with two crushing shafts in hopper.
Conveyor for feeding materials is optional.
Temperature control and frequency control is installed at control box.
Hard teech reducer and copper motor are on the hot melt machine.
| Hopper size |
Motor Power |
Reducer No. |
Capacity |
Shredding shafts Qty |
Barrel Qty |
| 1000*800 |
30kw |
225 |
350kg/h |
2 |
2 |
){kind=link}